Last ActiveApr 20, 2013
BirthdayJan 1, 1970 (56 years old)
Next BirthdayJan 1, 2027 (76 days)
Combat
Kills10
Losses17
Efficiency37%
Danger Ratio100%
ISK
Destroyed199.84m
Lost179.79m
ISK Efficiency53%
Balance+20.05m
Solo
Solo Kills3
Solo Ratio30%
Final Blows7
Combat Points10
Other
NPC Losses0
NPC Loss Ratio0%
Avg Kills/Day0.00
ActivityInactive
Loading valuable kills…
Ship ClassesLoading…
Bio
JTAG test reset with internal pulldown.
TRST, when driven high, gives the scan system control of the operations of the device. If this signal is not connected or driven low, the
device operates in its functional mode, and the test reset signals are ignored.
NOTE: TRST is an active high test pin and must be maintained low at all times during
An external pulldown resistor is required on this pin. The value of
this resistor should be based on drive strength of the debugger pods applicable to the design. A 2.2-kΩ resistor generally offers adequate protection. Since this is application specific, it is recommended that each target board be validated for proper operation of the debugger and the application. (I,↓)
TRST, when driven high, gives the scan system control of the operations of the device. If this signal is not connected or driven low, the
device operates in its functional mode, and the test reset signals are ignored.
NOTE: TRST is an active high test pin and must be maintained low at all times during
An external pulldown resistor is required on this pin. The value of
this resistor should be based on drive strength of the debugger pods applicable to the design. A 2.2-kΩ resistor generally offers adequate protection. Since this is application specific, it is recommended that each target board be validated for proper operation of the debugger and the application. (I,↓)
Dashboard
Stats
No activity in the selected period
Loading intel…